TM 10-4610-239-24
TM 08580B-24/3
ASSEMBLY.
WARNING
The R.O. pump power frame is heavy/difficult to handle. Two people are needed
to lift it to prevent personal injury or damage to the equipment.
a.
Position R.O. pump power frame (28) to access bottom.
b.
Position R.O. pump power frame (28) to access top.
NOTE
There are five connecting rods, shell bearing halves, andcrossheads. All are
installed the same. One is shown.
c.
Install bushing (34) in connecting rod (15).
d.
Position crosshead (32) on connecting rod (15) with oil groove oncrosshead toward oil hole at bushing (34).
NOTE
New bushing may require reaming until wrist pin fits snugly without binding.
e.
Install wrist pin (33) to secure crosshead (32).
CAUTION
Install shell bearing and connecting rod as marked during disassembly. Incorrect
assembly of connecting rod and shell bearing may damage equipment.
4-22
