TM 10-4610-240-10
TM 08580C-10/1
T.O. 40W4-13-21
FIGURE 2-29. RAW WATER SYSTEM
(14) Install backwash strainer onto the backwash pump frame (figure 2-30) as follows:
(a) Remove straps securing strainer to backwash pump.
(b) Remove the two mounting bolts, nuts and washers from the backwash strainer bracket.
(c) Remove caps from strainer and pump outlets.
(d) Attach strainer inlet connection to swivel connector on backwash pump.
(e) Place backwash strainer bracket against the frame and line up the holes.
(f) Insert two bolts into mounting holes, placing washers and nuts as required.
(g) Tighten all connections.
FIGURE 2-30. BACKWASH PUMP AND STRAINER
2-43
