TM 10-4610-240-10
TM 08580C-10/1
T.O. 40W4-13-21
(17) Using spanner wrench, hook up waste water and vent vessels systems (figure 2-33). Start at ROWPU with
hose going down and away from ROWPU, ending well downstream of raw water intake.
CAUTION
Hold VENT VESSELS valve from turning while tightening pressure hose. Recheck all hose connections to
make sure they are tight.
FIGURE 2-33. WASTE WATER SYSTEM
(18) Wood Paddles and Chemical Tube Assemblies.
(a) Open Storage box No. 3 (figure 2-34) and remove the wood paddles and four sets of chemical tube
assemblies.
(b) Examine tube assemblies. They must be open and clean.
(c) Check strainers. Ensure they are free of debris. Must be tightly fastened to tubes.
FIGURE 2-34. WOOD PADDLES AND CHEMICAL TUBE ASSEMBLIES
2-46
