TM 10-4610-240-10
TM 08580C-10/1
T.O. 40W4-13-21
(26) Unwind the power cables of each pump.
Pull the cables to the ROWPU junction box and unscrew
the covers of the connectors. Attach pump cables to the
connectors shown in figure 2-37. Plug the power cable
from the power source into J1, if not already installed.
(Army, MC only)
2-7. INITIAL ADJUSTMENTS AND CHECKS.
a. Drain Valves. Close all drain valves. Drain
valves must remain closed at all times during operation.
NOTE
You will find all seven drain valves to the
left front of the ROWPU as shown.
FIGURE 2-37. JUNCTION BOX
FIGURE 2-38. DRAIN VALVES (DURING OPERATION)
2-50
