TM 10-4610-240-10
TM 08580C-10/1
T.O. 40W4-13-21
b.
Installation.
(1)
Remove pin (6) from panel face.
(2)
Position top of meter (7) inside of upper bracket on panel face.
(3)
Slide meter (7) to left and engage bottom of meter in slot of lower bracket.
(4) Continue o slide meter (7) to left until meter is fully engaged. Secure meter by positioning pin (6)
through hole in bottom' of meter and hole in panel face.
(5) Remove protective cover (8) from terminal marked TDS MONITOR POWER and TDS MONITOR
SENSOR located on panel face.
(6) Remove protective covers (2) from cable (1) and attach connector (3) to terminal marked TDS
MONITOR POWER.
(7) Remove protective covers (2) from cable (4) and attach connector (5) to terminal marke d TDS
MONITOR SENSOR.
3-32
