TM 10-4610-240-10
TM 08580C-10/1
T.O. 40W4-13-21
3-11. REPLACING TOTAL DISSOLVED SOLIDS (TDS) METER. (Refer to figure 3-
FIGURE 3-17. TOTAL DISSOLVED SOLIDS (TDS) METER
a.
Removal.
(1)
Disconnect cable (1) from terminal marked TDS MONITOR POWER and attach protective cover (2) to
connector (3).
(2) Disconnect cable (4) from terminal marked TDS MONITOR SENSOR and attach protective cover (2)
to connector (5).
(3) Remove pin (6) from bottom of panel face and slide meter (7) to right until bottom of meter clears
bottom of bracket.
(4)
Lift meter (7) from panel face.
(5)
Attach protective covers (8) to two terminal connectors.
(6)
Install pin (6) to panel face.
3-31