TM 10-4610-240-24
TM 08580C-24/2
TO 40W4-13-22
3-28.
CABLE ASSEMBLY W49 (FILTER CONTROL) MAINTENANCE
REMOVAL
a.
Remove 14 screws (8), lockwashers (7), flat washers (6) and control box cover (5).
WARNING
High voltages in this equipment can cause serious Injury or death. Be
certain that all power is removed before performing maintenance.
NOTE
Tag wires before removal.
Remove clamps as required.
b.
Remove five screws (10) and wires (1).
c
Remove locknut (9) from adapter (3) and remove electrical cable (2).
d
Close control box cover (5) and install but do not tighten 14 screws (8), lockwashers (7), and flat washers (6).
INSPECTION
For inspection procedures, refer to paragraph 3-20.
TEST
For test procedures, refer to paragraph 3-20.
REPAIR
For repair procedures refer to paragraph 3-20.
INSTALLATION
WARNING
High voltages in this equipment can cause serious injury or death. Be
certain that all power is removed before performing maintenance.
a.
Remove 14 screws (8), lockwashers (7), flat washers (6) and control box cover (5). Discard lockwashers.
b.
Position electrical cable (2) and install locknut (9) on adapter (3).
c.
Position five wires (1) on terminals as tagged and install five screws (10).
NOTE
Install clamps as required.
d.
Position control box cover (5) and install 14 screws (8), new lockwashers (7) and flat washers (6).
3-161
