TM 10-4610-241-10
TO 40W4-13-41
2-17. PREPARATION FOR MOVEMENT - cont.
2 .
BACK TOWING VEHICLE INTO POSITION.
3.
REMOVE SAFETY PIN (6) AND CRANK HANDLE (7) FROM REAR OF JACK SUPPORT
BRACKET (8).
NOTE: TWO PERSONNEL OPERATING BOTH FRONT LEVELING JACKS ARE REQUIRED TO RAISE
TRAILER.
4. PLACE CRANK HANDLE (7) ON FRONT JACK (9). SLOWLY BACK TOWING VEHICLE (10) INTO
POSITION SO THAT LUNETTE (11) ALIGNS WITH PINTLE (12). RAISE OR LOWER FRONT OF TRAILER
AS NECESSARY TO POSITION LUNETTE (11) IN PINTLE (12). CLOSE PINTLE (12).
5.
SECURE TRAILER SAFETY CHAINS (13) TO TOWING VEHICLE (10).
2-144 Change 2
Figure 2-77. Trailer Preparation for Movement (Sheet 2 of 6)
(Models WPES-10 and H-9518-1)
