TM 10-4610-241-10
TO 40W4-13-41
2-16. PREPARATION FOR MOVEMENT - cont.
12.
REMOVE SAFETY PIN (23) AND CRANK HANDLE (24)
FROM REAR OF JACK SUPPORT BRACKET (25).
WARNING
LEVELING JACK IS SPRING LOADED. TO PREVENT INJURY TO
PERSONNEL, USE CARE WHEN PULLING OUT JACK.
14.
TO ROTATE REAR LEVELING JACK TO HORIZONTAL
15.
POSITION CRANK HANDLE (24) ON REAR JACK (26) AND
POSITION, REMOVE CRANK HANDLE, GRASP JACK AND
TURN HANDLE CLOCKWISE TO EXTEND JACK PAD (27).
PULL STRAIGHT OUT AGAINST SPRING TENSION. ROTATE
LINE UP HOLE IN JACK PAD WITH ROUND BAR (28) ON
JACK UP TO HORIZONTAL POSITION. ALLOW JACK TO
SECUREMENT PLATE (29). EXTEND JACK UNTIL JACK PAD
SPRING BACK TO LOCKED POSITION.
RESTS FIRMLY AGAINST SECUREMENT PLATE.
13.
POSITION CRANK HANDLE (24) ON REAR JACK (26) AND
TURN HANDLE COUNTERCLOCKWISE TO RAISE JACK PAD
(27).
Figure 2-77. Trailer Preparation for Movement (Sheet 5 of 6)
(Models WPES-10 and H-9518-1)
Change 2 2-147
