TM 10-4610-241-10
TO 40W4-13-41
3-10. CANVAS COVER REPLACEMENT.
This task consists of:
a.
Removal
b.
Installation
INITIAL SET-UP:
Equipment Condition:
ROWPU shutdown (para. 2-14)
a.
Removal. Refer to figure 3-11.
(1)
Push in on clasps (1) and unfasten tie straps (2) securing bottom of rear panel (3), front panel (4) and left
and right side panels (6 and 7) to ROWPU frame (11).
(2)
Fold rear panel (3) and front panel (4) onto top pane (5).
(3)
Fold left side panel (5) and right side panel (6) on top of front panel (4) and rear panel (3).
(4)
Push in on clasps (8) and unfasten tie straps (9) securing top panel (5) to ROWPU frame (11).
(5)
To aid positioning and installation of canvas cover (10), mark forward edge of cover with the word "Front".
(6)
Roll canvas cover (10) toward front of ROWPU frame (11).
(7)
Remove canvas cover (10) from ROWPU frame (11).
b.
Installation. Refer to figure 3-11.
(1)
Position canvas cover (10) on top of ROWPU frame (11) as marked during removal.
(2)
Unroll canvas cover (10) toward rear of ROWPU frame (11). Position cover so that top panel (5) lies flat
and large wrinkles are removed.
(3) Push in on clasps (8) and fasten tie straps (9) located under top panel (5) to ROWPU frame (11).
(4)
Lower right side panel (6) and left side panel (7) over ROWPU frame (11).
(5)
Lower front panel (4) and rear panel (3) over ROWPU frame (11).
(6)
Push in on clasps (1) and fasten tie straps (2) of side panels (6 and 7), rear panel (3) and front panel (4) to
bottom of ROWPU frame (11).
3-38