TM 10-4610-241-24
TO 40W4-13-42
3-16. CENTRIFUGAL PUMP (DISTRIBUTION PUMP) REPAIR - continued.
(5)
Install bracket (12), with attached casing (13) on motor (17), using bolts (11).
(6)
Position rotating parts of seal assembly; disk (10), sleeve (9), spring (8) and rubber disk (7) on shaft of
motor, making sure that smooth surface of disk (10) is in contact with disk
(7)
Insert blade of screwdriver in
screwdriver slot of shaft (5) to
keep shaft from turning and
install impeller (6). Use strap
wrench to tighten.
(8)
Position gasket (3) in cover (2) and install cover with four screws (1).
(9)
Install cap (4) on motor shaft (5).
3-139
