TM 10-4610-241-24
TO 40W4-13-42
3-20. TDS MONITOR REPAIR - continued.
(11)
Using small blade, flat tip screwdriver, depress wire retainers on TB2 (8) and connect
wires of cable (23) to TB2 as tagged during disassembly. If tags are lost or illegible, use
color code.
(12)
If removed, install caps (25 and 24). Refer to Paragraph 2-14.
d.
Test.
(1)
Test is limited to calibration (Paragraph 2-26) and test of cable assemblies (15 and 23).
Use cable schematic diagrams to test cables for continuity and shorts.
3-153
