TM 10-4610-241-24
TO 40W4-13-42
3-22. ROWPU REPLACE (MODELS WPES-10 AND H-9518-1).
This task consists of:
a. Removal
b. Installation
INITIAL SET-UP:
Tools Required
General Mechanics Tool Kit (Appendix B, Section III, Item 4)
Lifting Device with Sling (Appendix B, Section III, Item 3)
Chocks (Appendix B, Section III, Item 3)
Guide Ropes
Personnel Required
Four
Material Parts Required
Compound, Locking (Appendix C, Section II, Item 4)
Lockwashers (TM 10-4610-241-24P)
Equipment Condition
Reference
ROWPU drained and all loose Accessories removed (TM 10-4610-241-10).
Leveling Jacks extended (TM 10-4610-241-10).
Generator removed (Paragraph 3-2 1).
General Safety Instructions
WARNING
Weight of ROWPU is 11380 pounds (6 tons approximately). To prevent injury to
personnel and damage to the equipment, use proper lifting equipment rated at 10
tons or greater.
Always use assistants during lifting operations. Use guide ropes to move and
position hanging equipment.
Lack of attention or being in an improper position during lifting operations can
result in serious injury or death. Pay close attention to movement of equipment
being lifted. Do not stand under generator or in a position where you could be
pinned against another object. Watch your footing.
a.
Removal.
(1)
Position chocks (1) in front of forward and behind rear wheels of trailer (9).
(2)
Remove 16 bolts (2) lo&washers (3), and flatwashers (4) from bottom of trailer (9).
(3)
Connect lifting sling (5) to four lifting eyes (6).
(4)
Attach guide ropes (7) to guide loops on side, front and rear of ROWPU (8).
3-158 Change 1
