TM 10-4610-241-24
TO 40W4-13-42
3-21. GENERATOR SET REPLACE (MODELS WPES-10 AND H-9518-1) - continued.
b.
Installation.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
Attach hooks of lifting sling to lifting eyes (8) on generator (9), making sure hooks point inward as
illustrated.
Attach four guide ropes to four guide loops on side of generator (9).
WARNING
Lack of attention or being in an improper position during lifting operations can
result in serious injury or death. Pay close attention to movement of equipment
being lifted. Do not stand under generator, or in a position where you could be
pinned against another object. Watch your footing.
Always use assistants during lifting operations. Use guide ropes to move and
position hanging equipment.
Lift generator (9) and position it over flatbed trailer (4), using guide ropes to keep it steady and level.
Lower generator (9) as nearly as possible on generator mounting holes of trailer (4).
If necessary, use drift pin to further aline generator mounting holes with mounting holes in trailer (4).
Disconnect sling and guide ropes.
Secure generator (9) to trailer (4) with eight flatwashers (6), bolts (5), lockwashers (3) and nuts (2).
Remove chocks ( 1).
Connect power cable (Paragraph 2-56).
3-156 Change 1
