TM 10-4610-241-24
TO 40W4-13-42
3-22. ROWPU REPLACE (MODELS WPES-10 AND H-9518-1) - continued.
b.
Installation.
(1)
(2)
(3)
Attach lifting sling (5) to lifting eyes (6) on ROWPU (8).
Attach lifting sling (5) to lifting device.
Attach guide ropes (7) to guide loops on ROWPU (8).
WARNING
Lack of attention or being in an improper position during lifting operations can
result in serious injury or death. Pay close attention to movement of equipment
being lifted. Do not stand under ROWPU or in a position where you could be
pinned against another object. Watch your footing.
Always use assistants during lifting operations. Use guide ropes to move and
position hanging equipment.
(4)
(5)
(6)
(7)
(8)
Pick up ROWPU (8) and position over flatbed trailer (9), using guide ropes to keep it steady and level.
Lower ROWPU (8) into position over trailer (9), making sure mounting holes in trailer aline with mounting
holes on ROWPU as nearly as possible.
If necessary use drift pins to further aline mounting holes.
Apply locking compound to threads of 16 bolts (2).
Install 16 flatwashers (4), lockwashers (3), and bolts (2) through bottom of trailer (9) and into frame of
ROWPU (8)
(9)
Remove guide ropes (7) from ROWPU.
(10)
Remove lifting device from hoisting sling (5).
(11)
Remove hoisting sling (5) from lifting eyes (6).
(12)
Remove chocks (1) and install generator (Paragraph 3-21).
WARNING
Weight of ROWPU is 11380 pounds (6 tons approximately). To prevent injury to
personnel and damage to the equipment, use proper lifting equipment rated at 10 tons or
greater.
3-160 Change 1
