TM 10-4610-241-24
TO 40W4-13-42
3-50.
WIRING HARNESS, W REPAIR.
This task consists of:
a.
Removal
b.
Cleaning
c.
Inspection
d.
Test
e.
Repair
f.
Installation
INITIAL SET-UP:
Tools Required
General Mechanics Tool Kit (Appendix B, Section III, Item 4)
Multimeter (Appendix B, Section III, Item 3)
Refer to TM 43-0158/TO 1-1A-15 (Air Force) for Tools required to repair Wiring Harness.
Material/Parts Required
Lockwashers (TM 10-4610-241-24P)
Tiedown Straps (TM 10-4610-241-24P)
Refer to TM 43-0158/TO 1-1A-15 (Air Force) for Materials/Parts required to repair Wiring
Harness.
Equipment Condition
Reference
Control Box Assembly removed (Paragraph 3-49).
a.
Removal.
(1)
Remove nuts (1), screws (2), lockwashers (3), clamps (4) and tiedown straps (5), securing cable to junction
box and other wiring.
(2)
Remove screws (6) and disconnect wires (7) from terminal boards (8), switches and lights injunction box.
Refer to table, on opposite page for connection points.
(3)
Remove wiring harness (9) from control box (10).
3-292
