TM 10-4610-246-13
Section I. LUBRICATION INSTRUCTIONS
4.1
LUBRICATION.
Refer to Table 4-1 (PMCS table) for lubrication of the pumper assembly.
Section II. REPAIR PARTS, SPECIAL TOOLS, TMDE
AND SUPPORT EQUIPMENT
4.2
COMMON TOOLS AND EQUIPMENT.
a.
Authorized Common Tools and Equipment. For authorized common tools and equipment, refer to the
Modified Table of Organization and Equipment (MTOE), CTA 50-970, or CTA 8-100, a applicable to your unit.
b.
Mechanics Tool Kit. For general mechanics tool kit (SC 5180-90-CL-1005), refer to Appendix B, Section II,
Maintenance Allocation Chart for tool reference usage.
4.3
SPECIAL TOOLS, TMDE, AND SUPPORT EQUIPMENT.
No special tools, TMDE, and support equipment are required.
4.4
REPAIR PARTS.
Repair parts are listed and illustrated in the Repair Parts and Special Tools List (RPSTL), TM 10-4610-246-23P, covering
this equipment.
Section III. SERVICE UPON RECEIPT
4.5
SERVICE UPON RECEIPT.
The following steps should be followed upon receipt of hypochlorination unit.
a.
Unloadinq. Hypochlorination unit is shipped in one crate. To unload, do the following:
(1)
Check shipping crate for damage. A damaged crate indicates possible damage to equipment.
(2)
Remove all blocking and tie downs that may have been used to secure crate to carrier.
(3)
Using suitable material handling equipment, remove crate from carrier.
b.
Unpackinq.
(1)
Remove packing material from hypochlorination unit.
(2) Remove and retain technical publications envelope.
4-2
