ARMY TM 10-4610-309-14
MARINE CORPS TM 10802A-14/1
0004 00
TACTICAL WATER PURIFICATION SYSTEM (TWPS)
PREPARATION FOR USE AND INSTALLATION INSTRUCTIONS
SITE SELECTION AND COMPONENT LOCATION
P-1 Pump to P-2 Pump to Cyclone Separator Raw Water System Configuration (see Figure 4)
When both raw water pumps and the cyclone separator are used, the cyclone separator should be placed
at the discharge of the second raw water pump. The main components used in this configuration include
Diesel-Driven Pump P-1, Adaptor Assembly A-02, two 2 in. diameter, 50 ft long discharge hoses, Motor-
Driven Pump P-2, Adaptor Assembly A-04, one 2 in. diameter, 6 ft. long discharge hose, the cyclone
separator, and two 2 in. diameter, 50 ft long discharge hoses.
TOP VIEW
CYCLONE SEPARATOR
A-04
A-02
2 X 50 D-HOSE
2 X 6 D-HOSE
P-2 PUMP
P-1 PUMP
2 X 50 D-HOSE
SIDE VIEW
Figure 4. P-1 Pump to P-2 Pump to Cyclone Separator Raw Water System Configuration.
0004 00-6
