ARMY TM 10-4610-309-14
MARINE CORPS TM 10802A-14/1
0006 00
TACTICAL WATER PURIFICATION SYSTEM (TWPS)
PREPARATION FOR USE AND INSTALLATION INSTRUCTIONS
EQUIPMENT OFF-LOADING MARINE CORPS UNIT
3. Unfasten the operator station overhead support beam padding hook and loop seam and remove
the padding from the support beam.
4. Store the padding in a BII Box after other components are unpacked from the boxes.
5. Remove the eight bolts and lock washers from the operator station overhead support beam and
remove the beam (see Figure 6).
6. Reinstall the bolts and washers in the TWPS frame.
7. Store the beam under the high-pressure pumps.
8. Remove the retaining pins from the operator station roof and TWPS frame.
9. Raise the roof.
10. Install the pins through the bottom holes in the legs of the roof and through the holes in the TPWS
frame to secure the roof in the raised position (see Figure 6).
SUPPORT BEAM PAD
SUPPORT BEAM
ROOF
BOLTS AND WASHERS
RETAINING
PIN
GENERAL PURPOSE COVER
WINTER COVER
Figure 6. Operator Station Overhead Support Beam Removal and Roof Raising.
0006 00-7
