ARMY TM 10-4610-309-14
MARINE CORPS TM10802A-14/1
0009 00
TACTICAL WATER PURIFICATION SYSTEM (TWPS)
PREPARATION FOR USE AND INSTALLATION INSTRUCTIONS
COLD WEATHER SET-UP OPERATION UNDER UNUSUAL CONDITIONS
Deploy the standard distribution system equipment as follows (see Figure 24):
WARNING
Two person lift. Two people are required to safely lift the product water
distribution water tanks and Motor-Driven Product Water Distribution Pump P-7.
Lift with your legs, not your back. Failure to observe this warning may result in
back injury.
1. Position the Product Water Distribution Tanks T-3 and T-4 and the product water Distribution
Pump P-7 as follows:
a. Place the distribution tanks in their rough locations, making sure that the first tank is
within 40 ft. of the TWPS product water outlet.
b. Unfold the ground cloth from around each tank and unfold each tank on its ground cloth.
c. Spread the tanks out to their final shape and eliminate any ridges in the bottoms.
d. Position the tanks about 6 ft. apart with the connections facing each other.
e. Pull the tank inlet and outlet connections out away from the tank bottoms so that they will
be clear when the tanks are filled.
f. Place a pump insulating platform on the ground where the motor-driven Distribution
Pump P-7 is to be located.
g. Move motor driven product water Distribution Pump Skid P-7 roughly in place on top of
the insulating platform.
NOZZLE V-523B
A-15
P-7
2 X 5 S-HOSE
A-08
1 X 10 S-HOSE
2 X 65 D-HOSE
T-3
T-4
2 X 5 S-HOSE
A-07
PRODUCT WATER DISCHARGE
OUTLET HOSE
Figure 24. Product Water Distribution System Equipment Deployment.
0009 00-29
