TM 10-4610-310-14
0018 00
LOADING THE HIGH MOBILITY MULTIPURPOSE WHEELED VEHICLE
WARNING
Caution must be exercised when loading/unloading the LWP to/from the HMMWV. There
exists the possibility of slips and/or falls. When loading/unloading the LWP use caution to
prevent serious injury to personnel and/or damage to the equipment.
WARNING
Modules are to be lifted by at least four to six personnel. Do not attempt to lift any module with
less than four personnel. Serious injury to personnel could result.
These instructions must be followed as outlined herein. Positioning of the equipment is critical for proper
transport.
1. Position the HMMWV so that the 3kW TQG set is at the rear of the vehicle.
2. Remove cargo cover and cover bows from cargo compartment if necessary. Stow cover and bows in a
suitable location that will not interfere with loading/unloading.
3. Open and secure HMMWV tailgate.
4. Unfold 10-foot ramp. Position the ramp on the tailgate of the HMMWV. See Figure 2.
Figure 2. Foldable Ramp Installation.
