TM 3-4230-204-12&P
SERVICE UPON RECEIPT
LOCATION/ITEM
ACTION
REMARKS
1
M11 DECON/
a.
Inspect the equipment for damage incurred during
All parts
shipment. If the equipment has been damaged,
report the damage on SF 364, Report of
Discrepancy (ROD).
b.
Check the equipment against the packing slip to
see if the shipment is complete.
Report all
discrepancies in accordance with the instructions of
DA PAM 738-750.
c.
Check to see whether the equipment has been
modified. (Refer to DA PAM 310-1.)
d.
Check that M11 DECON has adhesive-backed
identification plate securely attached. Refer to
2
M11 DECON/
Check that sealing wire (1) is installed properly. Make
Spray head assembly
sure it secures the arming pin (2), thumb lever (3), and
handle (4). If wire is broken, missing, or installed
improperly, check to see if nitrogen cylinder (5) is
empty. (Refer to page 2-2.) If empty, replace nitrogen
cylinder.
4-2
