M11 DECON DOES NOT SPRAY WHEN THUMB LEVER IS PRESSED.

TM 3-4230-204-12&P

2. M11 DECON DOES NOT SPRAY WHEN THUMB LEVER IS PRESSED.

Step 1. Check to see if nozzle (3) is blocked with rust or corrosion.

Clean rust or corrosion from nozzle hole.

Step 2. Check to see if liquid or air sprays around nitrogen cylinder neck.

Replace missing or deformed O-ring.

Step 3. Check to see if piercing pin (4) is present and nitrogen cylinder is

pierced.

If pin is broken or missing, replace spray head assembly.

3. M11 DECON LEAKS AROUND TOP OF CONTAINER (5).

Check for missing or deformed O-ring (6).

Vent pressure from container (5), unscrew spray head

assembly (7) from container. Install new O-ring (6), and

screw spray head assembly back into container.

4-7

Privacy Statement
Press Release
Contact