TM 3-4230-204-12&P
3
M11 DECON/
a. Check bracket (6) for rust or corrosion. If rust or corrosion is found,
Bracket
remove it with a wire brush and spot paint (see TM 43-0139).
b. Check latch (7). Be sure latch (7) locks damp (8).
c.
Be sure that a filled nitrogen cylinder (5) is installed in its dip (9).
d. Check to see if three screws (10), washers (11), and nuts (12) are
packed with the M11 DECON.
NOTE
M11 DECON is to be placed in storage or issued to the user
after above services have been completed. DO NOT FILL
container with DS2 at this time. Refer to TM 740-90-1,
Administrative Storage of Equipment, for further
information on storage.
4-3
