TM 3-4230-218-12&P
(2) Allow to dry.
c.
Inspection.
(1) Inspect for missing hardware.
(2) Inspect mica window (11) for cracks or carbon buildup.
(3) Inspect cell (9) for buildup of carbon or cracks.
(4) Inspect mounts and brackets for cracks.
d.
Installation.
(1) Using sealing compound (item 8, Appendix E) install elbow (7),
air vent line (8), and nipple (2).
(2) To connect cell (9) wires to control panel terminal strip, refer
to page 4-35.
Connect white wire with black tracer to No. 7
terminal and white wire with blue tracer to No. 9 terminal.
(3) Install cell (9) in tee (3) and tighten mounting screw (10).
(4) Install plate (12), mica window (11), tee (3), two washers (4),
two lockwashers (5), and two bolts (6).
(5) Connect air cooling hose (1) to nipple (2).
Photocell, Removed/Installation.
4-37
