4-21.
TM 3-4230-218-12&P
This task consists of:
Repair of Filter Element
INITIAL SETUP:
Tools Required:
Tool Kit, On-Board
Materials Required:
Brush,
Varnish
(item 1, Appendix E)
Cleaning Solvent
(item 3, Appendix E)
Filter Element (P/N-7111-296)
Engine shutdown and cool.
a.
Removal.
(1) Remove panel.
(2) Remove drain (10) and gasket (11).
Drain fuel into suitable
container.
(3) Remove bolt (1) and washer (2).
Separate bottom (9), gasket
(8), bowl (7), and filter element (5) from filter body (13).
Remove and discard gaskets (4 and 6) and O-rings (3 and 12).
b.
Cleaning.
WARNING
The cleaning solvent used emits strong vapors and is flammable.
To avoid
illness or fire, use in a well-ventilated area and away from open flames. DO
NOT breathe vapors for a prolonged time.
(1) Wash fluid filter components in cleaning solvent (item 3, Appen-
dix E) using a varnish brush (item 1, Appendix E).
(2) Allow to dry.
C.
Installation.
(1) Place bowl (7), on bottom (9) and install new gasket (6) on
bowl making sure gasket (8) is in place.
4-42
