4-43
TM 3-4230-218-12&P
(2) Install new gasket (6) and bowl (7).
(3) Position new filter element (5) and new gasket (4) on bowl (7).
NOTE
Be sure bowl (7) is properly seated against the gasket (6) prior to tightening
bolt (l).
(4) Install new O-rings (3 and 12) on filter body (13).
(5) Position assembled components (4 through 9) on filter body
(13).
Secure components in place with washer (2) and bolt
(1).
Install drain (10) and gaskets (11).
(6) Perform operational checkout and inspect for leaks.
Fluid Filter Element, Removal/Installation.
