TM 3-4230-237-10
0007 00
SPRAYING WATER FROM A NATURAL SOURCE - Continued
5
6
3. Prime the pump and start the pump unit (Page 0006 00-1). Unreel the discharge hoses (5) from the two hose reels.
4. To spray from the upper reel, open VALVES NO. 1 and 3. To spray from the lower reel, open VALVES NO. 1 and 2.
Open ball valve (6) on gun assembly to spray. Open the slurry nozzle's orifice and deflector assembly to produce the desired
spray pattern.
NOTE
The pump discharge PRESSURE GAGE should indicate approximately 105 psi while spraying.
5. After the spraying mission is complete, stop the pump unit (Page 0006 00-7). Clean and store the apparatus according to
applicable procedure listed in WP 0011 00.
SPRAYING WATER FROM TANK
1. Follow operation number 6 on the STARTING PROCEDURE instruction plate.
0007 00-2
