TM 3-4230-237-10
0008 00
MIXING WATER AND LIQUID CHEMICALS USING THE PRIME DETERGENT TANK - Continued
Fire Extinguishing Foam for Petroleum Fires - Continued
3
9
6. Open the tank drain valve (3) on the tank unit by turning valve handle approximately five full turns.
7. Open the valve (9) on the gun assembly and begin spraying foam-water mixture. The mixture should be thick and fluffy
(not thin and watery). If necessary, turn tank drain valve (3) handle toward the closed position in one-fourth turn increments
until the foam water mixture reaches proper consistency.
8. After the spraying mission is complete stop pump unit. Clean and store the apparatus according to applicable procedure
listed in Work Package 0011 00.
END OF WORK PACKAGE
0008 00-23/24 blank
