TM 3-4230-237-10
OPERATOR
M12A1 DIESEL ENGINE DRIVEN DECONTAMINATION APPARATUS
NSN 4230-01-502-7224
OPERATION UNDER USUAL CONDITIONS:
SHOWERING AND HEATING WATER IN THE TANK
INITIAL SETUP:
References
GENERAL
Pump water for showering from either the tank unit or from a natural source. Before using water from the tank for showering
personnel, inspect the tank for any evidence of contamination such as STB decontaminating agent, sodium hydroxide,
sodium hypochlorite chemicals, calcium hypochlorite, or fire fighting foam.
Clean tank before filling with water for showering. A water temperature of 100F is suitable for showering.
SHOWERING
1
2
1
5
1
2
1
4
3
1. Remove the eighteen pipes from the storage bracket on the tank unit. Sort the pieces as you lay them on the ground.
2. Lay six top sections (four of item (1) and two of item (2)), one upper rear support (3), one upper center support (4), and
one upper front support (5) in a line, as illustrated, and connect the couplers.
0009 00-1
