TM 3-4230-237-10
0009 00
SHOWERING - Continued
13. When mission is completed, shutdown the water heater (Page 0007 00-9).
14. After the water heater is shut down, stop the pump unit (Page 0006 00-7).
15. Disassemble the personnel shower assembly taking care to avoid burring pipes or fittings.
CAUTION
Always position six horizontal supports (pipes with solid caps) in the brackets so that the pipe caps are on
top. Otherwise, water can be trapped in the pipe causing rust or the water can freeze and break the pipe.
16. Stow the shower assembly in the brackets on the tank unit assembly. The sections with solid caps should be stowed with
the caps up to keep water from building up in the pipe.
17. Clean and store the apparatus according to the applicable procedure listed in WP 0011 00.
0009 00-6
