TM 3-4230-237-10
OPERATOR
M12A1 DIESEL ENGINE DRIVEN DECONTAMINATION APPARATUS
NSN 4230-01-502-7224
LUBRICATION INSTRUCTIONS
INITIAL SETUP:
Materials/Parts
Cleaning compound, solvent (Page 0028 00-2, item 7)
Grease, automotive and artillery (Page 0028 00-2, item 15)
Lubricating oil, 15W40 (Page 0028 00-2, item 17)
Lubricating oil, PL-M (Page 0028 00-3, item 18)
Lubricating oil, PL-S (Page 0028 00-3, item 19)
LUBRICATION INSTRUCTIONS
WARNING
Fire and explosion danger exist when solvent cleaning compound is used. Make sure that equipment is dry
before operations begin.
Interval and the related manhour time are based on normal operation. The manhour time specified is the time you need to do
all the services. Reduce the interval if your lubricants are contaminated or if you are operating the equipment under adverse
operating conditions, including longer-than-usual operating hours. During periods of low operation, the interval may be
extended if the preservation steps of Note 11 are followed. Lubrication points, intervals, and lubricants are listed below.
Clean fittings, valve stems, and pipe threads with solvent cleaning compound (Page 0028 00-2, item 7). Dry before
lubricating. Do not overlubricate; wipe off excess lubricant.
Total Man-Hours
Interval
Man-Hr
Q
0.80
LUBRICANT
INTERVAL
GAA
Q
Tank Unit (1 fitting on
tank drain valve)
(See note 2, 5, & 9)
GAA
Q
Personnel Shower
Assembly Threads
(See note 8)
0020 00-1
