TM 5-3800-205-10-2
TROUBLESHOOTING PROCEDURES - CONTINUED
0011 00
Table 1. Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
AIR SYSTEM AND BRAKES - CONTINUED
3. If problem still exists, notify
5.
Service Brakes Do Not
Operate
3. Check for air/hydraulic oil
Unit Maintenance.
Correctly - Continued.
leaks or damage to brake
system components.
WARNING
Park machine on level ground, stop engine, and lower tank to prevent injury to operator and/or
severe damage to machine.
6.
Service Brakes
Do
Not
Release
1. Check for mud or dirt under
1. Clean mud or dirt from under
brake pedal. If problem still
Correctly.
brake pedal
exists, go to test step 2.
2. Check air/hydraulic hoses for
2. Connect air/hydraulic hoses if
loose connections.
required. If problem still
exists, go to test step 3.
3. If problem still exists, notify
3. Check for air/hydraulic oil
Unit Maintenance.
leaks or damage to brake
system components.
CHARGING SYSTEM
Alternator Alert Indicator Comes On.
NOTE
A thirty (30) minute cool down time may be required before circuit breaker can be reset.
1. Reset circuit breaker. If
1. Check that circuit breaker at
problem still exists, go to test
fuse/circuit breaker panel in
step 2.
cab is not tripped.
2. Check for loose or broken
2. If loose or broken drive belt is
drive belt.
found, or if drive belt is okay
and problem still exists, notify
Unit Maintenance.
