TM 5-3800-205-10-2
Table 1. Preventive Maintenance Checks and
Services (PMCS) for 613CWD Water Distributor - Continued.
LOCATION
ITEM TO
CHECK/
ITEM
MAN-
NOT FULLY MISSION
SERVICE
NO.
INTERVAL
HOURS
PROCEDURE
CAPABLE IF:
WARNING
BE ALERT for personnel in the area while operating
machine. Always check to ensure area is clear of personnel
and obstructions before starting engine, moving machine or
lowering or raising water distributor bowl. Failure to follow
this warning may result in serious injury or death to person-
nel or damage to equipment.
NOTE
If the tractor begins to move during service brake test,
reduce engine speed immediately and engage parking brake.
60
After
Service
Perform the following service brake Machine moves with engine
Brake Test
test:
RPM less than 1000 RPM.
(1) Ensure area around machine is
clear of all personnel and obsta-
cles.
(2) Test brakes on dry level surface.
(3) Fasten seat belt before testing
brakes.
(4) Ensure air system is at operat-
ing pressure of 125 +/- 10 psi
(862 +/- 69 kPa).
(5) Raise tank.
(6) Apply service brakes
and
release parking brake.
(7) With engine at idle with service
brakes applied, move transmis-
sion control lever to forward
speed position 2.
(8) Gradually increase engine
RPM. Service brakes should
prevent machine movement
with engine running at 1000 +/-
100 RPM.
0013 00-45
