TM 5-3800-205-10-2
Table 1. Preventive Maintenance Checks and
Services (PMCS) for 613CWD Water Distributor - Continued.
LOCATION
ITEM TO
ITEM
MAN-
CHECK/
NOT FULLY MISSION
NO.
INTERVAL
HOURS
SERVICE
PROCEDURE
CAPABLE IF:
Check that brake fluid reservoir, Any brake fluid leaks are
56
After
Brake Fluid
mounted inboard of tractor's right- evident.
Reservoir
side fender, is securely mounted with
no evidence of brake fluid leaks.
a. Visually check tire for cuts or a. Tire has cuts or bulges in
57
After
Front Wheel
tread or sidewall area or
and Tire
bulges in tread or sidewall area.
other damage that would
Check for uneven wear or underin-
impair operation.
flation. Look for stones or other for-
eign material embedded in tread or
sidewall area. Remove stones or
other foreign material if found.
b. Check for loose or missing wheel b. Missing wheel studs, lug
nuts, rim lock or dam-
studs, lug nuts, rim lock, and valve
aged valve stem are
stem with cap.
noted.
c. Check for oil leaks from final drive c. Class III oil leaks are evi-
at wheel end.
dent.
d. Check fender for damage.
a. Visually check for damage or leaks. a. Class III leaks are evi-
58
After
0.1 Hours Hydraulic
dent.
Tank Oil
Level Check
b. With engine idling, tank lowered to
the ground, and hydraulic oil at
operating temperature, perform hot
check of hydraulic oil level. Oil
level must be above bottom line on
sight gage.
HYDRAULIC TANK
OIL
MUST
BE
ABOVE
THIS
LINE
390-009
0013 00-43
