TM 5-3800-205-10-2
Table 1. Preventive Maintenance Checks and
Services (PMCS) for 613CWD Water Distributor - Continued.
LOCATION
ITEM TO
CHECK/
ITEM
MAN-
NOT FULLY MISSION
SERVICE
NO.
INTERVAL
HOURS
PROCEDURE
CAPABLE IF:
NOTE
61
After
Parking
Brake Test
If machine begins to move during parking brake test, reduce engine
speed immediately and engage service brakes.
(1) Ensure area around machine is Machine moves with engine
clear of all personnel and obsta- RPM less than 1000 RPM.
cles.
(2) Test brakes on dry level surface.
(3) Fasten seat belt before testing
brakes.
(4) Ensure air system is at operat-
ing pressure of 125 + 10 psi
(862 + 69 kPa).
(5) Raise tank.
(6) With engine at idle and parking
brake applied, move transmis-
sion control lever to forward
speed position 2.
(7) Gradually increase engine
RPM. Parking brake should pre-
vent machine movement with
engine running at 1000 + 100
RPM.
(8) Shut down engine (WP 0005
0013 00-46
