TM 5-3800-205-10-2
EXTERNAL AIR TRANSPORT BY CH-47 HELICOPTER - CONTINUED
0016 00
MACHINE DISASSEMBLY AND SECTIONALIZATION - CONTINUED
11.
Remove three guard plates from underside of tractor and set aside for stowage in ISU-60 container:
NOTE
To assist in installation of plates, mark plates as "front", "middle", and "rear".
a.
With assistance, loosen but do NOT remove six bolts securing each guard plate to tractor frame.
b.
Remove three bolts and washers from side of guard plate that is NOT slotted, while supporting remainder of
weight of plate.
c.
Lower guard plate slightly and pull plate free of bolts and washers at opposite side of plate. Remove plate from
under tractor.
d.
Repeat steps for two remaining guard plates.
e.
Reinstall mounting hardware securely on frame of tractor.
FRONT GUARD PLATE
BOLTS ON
SLOTTED SIDE
MIDDLE GUARD PLATE
REAR GUARD PLATE
390-1024
0016 00-12
