TM 5-3800-205-10-2
EXTERNAL AIR TRANSPORT BY CH-47 HELICOPTER - CONTINUED
0016 00
MACHINE DISASSEMBLY AND SECTIONALIZATION - CONTINUED
15.
Install rear stability skid to transmission mount:
a.
Remove two bottommost bolts and washers from each side of transmission mount. Set bolts and washers aside for
stowage in BII toolbox.
b.
Position rear stability skid in front of transmission housing with cutout on skid on left side of machine.
c.
Slide rear stability skid rearward until bolt holes in skid are aligned with bolt holes in transmission mount.
d.
Loosely install rear stability skid with four washers and bolts, removed from toolbox.
e.
Tighten bolts. Retighten bolts to 272 lb-ft (370 Nm) after separation of tractor from water distributor.
BOLTS AND
WASHERS
REAR
STABILITY
SKID
CUTOUT ON
LEFT SIDE
0016 00-16
