TM 5-3800-205-10-2
EXTERNAL AIR TRANSPORT BY CH-47 HELICOPTER - CONTINUED
0016 00
MACHINE DISASSEMBLY AND SECTIONALIZATION - CONTINUED
14.
Install front stability skid to lifting eye at left-front corner of tractor bumper:
a.
Remove bolt, washer, and pin assembly from front stability skid.
b.
Position front stability skid at lifting eye. Install pin assembly through bottommost towbar hole in lifting eye.
Install washer and bolt to pin assembly.
LIFTING
PIN AND
EYE
BOLT
LONG
BRACE
SHORT
BRACE
FRONT
STABILITY
SKID
NOTE
Do NOT tighten front (long) brace mounting hardware until all items have been assembled. Ensure braces
are correctly aligned and are flush against mounting surfaces.
c.
Position two braces between front stability skid and underside of tractor frame. Secure each brace to frame with
washer and bolt used to install front guard plate. Secure each brace to front stability skid with bolt, two washers,
and nut. Tighten bolts and nuts to 272 lb-ft (370 Nm).
BOLT AND WASHER
BOLT AND WASHER
LONG BRACE
SHORT
BRACE
390-1794
BOLT, WASHERS, AND NUT
LONG BRACE
0016 00-15
