TM 5-3800-205-10-2
AIR TRANSPORT BY C-130 AIRCRAFT - CONTINUED
RETURN MACHINE TO OPERATIONAL CONFIGURATION
NOTE
Whenever hydraulic hose quick disconnects need to be connected, operate control levers through all posi-
tions (WP 0004 00) to relieve any trapped hydraulic pressure in hoses. This will facilitate connection of
hoses.
1.
Remove tiedowns and unload ISU-60 container from aircraft. Place container in staging area where machine will be
assembled.
2.
Remove blocking, shoring, and tiedowns from machine.
3.
Remove cotter pin and pin from each end and remove turnbuckles.
.
PIN AND
COTTER PIN
TURNBUCKLE
LOAD
TRANSFER
PIN AND
AXLE
COTTER PIN
WARNING
Always use a ground guide when driving machine down ramp to unload from aircraft. Failure to use a
ground guide may result in an accident, causing death or injury to personnel or damage to equipment.
When operating machine without ROPS/FOPS down aircraft ramp, drive with extreme caution and at a
DEAD SLOW speed and in 1st gear ONLY. Machine has no rollover/falling object protection without
ROPS/FOPS. Failure to follow this warning may cause injury or death to personnel or damage to equip-
ment.
CAUTION
Machine must be driven STRAIGHT off aircraft. Failure to drive straight off will damage either or both load
transfer axles and bowl lift cylinders.
0017 00-28
