TM 5-3800-205-10-2
AIRDROP BY C-130 AIRCRAFT - CONTINUED
0018 00
CONFIGURE MACHINE FOR AIRDROP - CONTINUED
14.
Open fenders and secure in open position:
a.
Remove three nuts, to lockwashers, six washers and three bolts. Discard lockwashers.
b.
Open bottom section of fender enough to reinstall two nuts, four washers and bolts in bottom section of fender in
outside two holes.
TOP SECTION
OF FENDER
BOLTS, LOCKWASHERS,
WASHERS AND NUTS
BOTTOM SECTION
OF FENDER
c.
Fully open top and bottom sections of fenders.
d.
Install bolt, two washers and nut securing top section of fender in open position in middle hole.
e.
Secure bottom section of fender in open position.
f.
Repeat for other fender.
TOP SECTION
OF FENDER
BOLT, WASHERS
AND NUT
BOTTOM SECTION
OF FENDER
0018 00-14
