TM 5-3800-205-10-2
AIRDROP BY C-130 AIRCRAFT - CONTINUED
0018 00
RETURN MACHINE TO OPERATIONAL CONFIGURATION - CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure any lifting device used is in good condition and of suitable lift capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may result in death or injury to person-
nel.
NOTE
If ISU-60 container has not been delivered to site of machine assembly, performance of certain steps will
need to be delayed until container arrives. Proceed with assembly of machine, returning to these steps as
soon as container is available.
5.
Place ISU-60 container near work area and remove the following items from container, in accordance with illustrations
and information in Table 2:
a.
torque wrench;
TORQUE WRENCH
390-1118
b.
toolbox (minus tools placed in BII toolbox on water distributor);
c.
ROPS/FOPS;
d.
windshield (with hinge);
e.
exhaust stack;
f.
windshield wiper arm assembly; and
g.
upper handrail (with side mirror).
0018 00-21
