TM 5-3800-205-23-3
COMPOSITE LIGHT MAINTENANCE - CONTINUED
0004 00
LAMP REMOVAL - CONTINUED
3.
Inspect gasket (4) for cracks and tears. Remove and discard gasket if damaged.
NOTE
Left lamp is for stoplight, center lamp is for taillight, and right lamp is for turn signal and hazard light. All
lamps are removed the same way.
4.
Remove stoplight lamp (5) from socket (6).
5.
Remove taillight lamp (7) from socket (8).
6.
Remove turn signal and hazard light lamp (9) from socket (10).
7,8
4
5,6
9,10
3
390-1371
LAMP INSTALLATION
1.
Install turn signal and hazard light lamp (9) in socket (10).
2.
Install taillight lamp (7) in socket (8).
3.
Install stoplight lamp (5) in socket (6).
4.
If removed, install new gasket (4) on light housing (3).
5.
Install lens (1) on light housing (3) with two screws (2).
0004 00-2
