TM 5-3800-205-23-3
COMPOSITE LIGHT MAINTENANCE - CONTINUED
0004 00
LIGHT ASSEMBLY REMOVAL
1.
Remove two nuts (15), lockwashers (16), washers (17), bolts (18), washers (19) and enclosure (13). Discard lockwash-
ers.
2.
Remove two screws (11) and washers (12) from back of light assembly (14).
3.
Disconnect light assembly connector from wiring harness (20).
4.
Remove light assembly (14) from enclosure (13).
11,12 (HIDDEN)
13
14
20
15,16,17,
18,19
5.
Remove lamps (Refer to Lamp Removal).
LIGHT ASSEMBLY INSTALLATION
1.
Install lamps (Refer to Lamp Removal).
2.
Install light assembly (14), two washers (12) and screws (11) on enclosure (13).
3.
Connect light assembly connector to wiring harness (20).
4.
Install enclosure (13), two washers (19), bolts (18), washers (17), new lockwashers (16) and nuts (15).
5.
Place battery disconnect switch in ON position (TM 5-3800-205-10-2).
6.
Check operation of composite light (TM 5-3800-205-10-2).
END OF WORK PACKAGE
0004 00-4
