TM 5-3800-205-23-3
BLACKOUT LIGHT MAINTENANCE - CONTINUED
0005 00
LED REMOVAL - CONTINUED
2.
Inspect seal (4) for cracks and tears. Remove and discard seal if damaged.
NOTE
Top LED is for blackout marker light. Bottom LED is for blackout drive light.
3.
Remove LED (5) from socket (6).
4.
LED (7) from socket (8).
7,8
5,6
4
390-1370
LED INSTALLATION
NOTE
Top LED is for blackout marker light. Bottom LED is for blackout drive light.
1.
Install LED (5) in socket (6).
2.
Install LED (7) in socket (8).
3.
If removed, install new seal (4) in housing (2).
4.
Position cover (2) on housing (3) and tighten six captive screws (1).
5.
Check light for proper operation.
0005 00-2
