TM 5-3800-205-23-3
REAR SERVICE BRAKESHOES AND BRAKE CALIPER REPLACEMENT - CONTINUED
0012 00
CALIPER REMOVAL - CONTINUED
4.
With assistance, remove eight bolts (10) and caliper (2) from hub (9).
9
2
10
CALIPER INSTALLATION
1.
Install two lifting brackets on caliper (2).
2.
Attach nylon sling to lifting brackets and suitable lifting device.
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Brake caliper weighs 106 lb (48 kg).
3.
Install caliper (2) on hub (9) and install eight bolts (10). Tighten bolts to 96 lb-ft (130 Nm), then turn bolts an additional
120 degrees.
0012 00-4
