TM 5-3800-205-23-3
AIR/HYDRAULIC BRAKE CYLINDER REPLACEMENT - CONTINUED
0011 00
REMOVAL - CONTINUED
14
10,11,
12,13
390-1583
9
8
INSTALLATION
NOTE
Remove old antiseizing tape from male air fittings and apply new tape before connections are made.
1.
Install quick-release valve to air/hydraulic brake cylinder (8) (WP 0014 00).
2.
Install air/hydraulic brake cylinder (8) and bracket (14) on machine with two bolts (13), four flatwashers (12), two new
lockwashers (11), and nuts (10).
3.
Connect air exhaust hose (9) to air/hydraulic brake cylinder (8).
CAUTION
Always use two wrenches on fittings when installing brake lines. Failure to do so may damage fittings.
4.
If removed, install tube (6) on brake fluid reservoir.
5.
Connect other end of tube (6) to air/hydraulic brake cylinder (8) and tighten nut (7).
6.
Install two electrical leads (5) on air/hydraulic brake cylinder (8) with two washers (4) and screws (3).
7.
Position tube (1) on air/hydraulic brake cylinder (8) and tighten nut (2).
0011 00-3
