TM 5-3800-205-23-3
REAR SERVICE BRAKESHOES AND BRAKE CALIPER REPLACEMENT - CONTINUED
0012 00
BRAKESHOES REMOVAL
1.
Loosen two bleeder screws (1) to relieve pressure in caliper (2).
2.
Loosen bolts (4) and install two 1/2 in. (12 NC) bolts (3) in two pins (6).
3.
Use two bolts (3) to remove two pins (6).
4.
Remove brakeshoes (5) from caliper (2).
1
2
3
4
390-2029
5 (HIDDEN)
6
BRAKESHOES INSTALLATION
1.
Install brakeshoes (5) to brake caliper (2).
2.
Push in two pins (6) and tighten bolts (4).
3.
Remove two 1/2 in. (12 NC) bolts (3) from two pins (6).
4.
Tighten two bleeder screws (1).
5.
Bleed service brake system (WP 0016 00).
6.
Install rear tire and rim (WP 0017 00).
CALIPER REMOVAL
CAUTION
Always use two wrenches on fittings when removing brake lines. Failure to do so may damage fittings.
Plug brake line to prevent contamination of brake system.
1.
Loosen nut (8) and disconnect brake line (7) from caliper (2).
0012 00-2
