TM 5-3800-205-23-3
BRAKE LINES REPLACEMENT
THIS WORK PACKAGE COVERS
Tube Assemblies: Removal, Installation
Caliper Brake Hose Assembly: Removal, Installation
INITIAL SETUP
Maintenance Level
Materials/Parts - Continued
Tag, marker (Item 39, WP 0044 00)
Unit
References
Tools and Special Tools
Tool kit, general mechanic's (Item 33, WP 0045 00)
Personnel Required
Shop equipment, common no. 1 (Item 24, WP 0045
Two
Materials/Parts
Equipment Condition
Cap set, protective (Item 5, WP 0044 00)
Rear steps removed (WP 0018 00)
Rear tires and rims removed (WP 0017 00)
Rag, wiping (Item 31, WP 0044 00)
TUBE ASSEMBLIES REMOVAL
CAUTION
Always use two wrenches on fittings when removing brake lines. Failure to do so may damage fittings.
Cap all lines to prevent fluid loss and contamination of brake system.
NOTE
Tag all lines to aid in installation.
Care must be taken to ensure that fluids are contained during maintenance of machine. Be prepared to
collect fluid with suitable containers before opening any component or disassembling any component
containing fluids. Ensure all spills are cleaned up.
Dispose of all fluids according to local regulations and mandates.
