TM 5-3800-205-23-3
REAR TIRE AND RIM REPLACEMENT - CONTINUED
0017 00
REMOVAL - CONTINUED
NOTE
4
Tire weighs 928 lb (421 kg).
5.
Attach a safety strap to tire (4) and to a suitable lifting
device with a minimum 1000 lb (454 kg) capacity.
6.
Remove two remaining nuts (1) and washers (2). Remove tire (4) and rim (3).
INSTALLATION
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Tire weighs 928 lb (421 kg).
1.
Position tire (4) and rim (3) on machine.
2.
Install two washers (2) and nuts (1) and hand tighten.
3.
Remove strap and lifting device from tire (4).
4.
Install 14 remaining washers (2) and nuts (1).
5.
Remove support stands and lower water tank to ground.
6.
Tighten nuts (1) to 105 lb-ft (140 Nm).
7.
Tighten nuts (1) to 370 lb-ft (500 Nm).
0017 00-3
